Bobcat V518 M7497 Error Code
M7497 Error Code
Main Controller Controller Programmed is the main cause of M7497 error.This code can lead to engine failure if the issue is not addressed. Working with a maintenance professional is crucial in order to review and address signs of overheating on your vehicle. In the long term, this can prevent failure at a critical time.
Tip For V518 Model
If the engine stops, the boom / bucket
(attachments) can be lowered to the ground
using hydraulic pressure in the accumulator.
The control console must be in the locked
down position, and the key switch in the ON
position.
Use the control lever to lower the boom.